Miraqua replacement cartridges

Wkłady wymienne Miraqua - CzystyStyl

Miraqua Replacement Cartridges – The Heart of Your Dispenser

Your Miraqua dispenser is an advanced water factory, but its effectiveness depends on one thing: clean filters . Regularly replacing your cartridges is the only way to maintain premium water quality, preserve the properties of hydrogen water, and protect your device from limescale. In this category, you'll find only original filter cartridges designed for Miraqua Delta, Omega, Alfa, and Yota models.

9 products

QuickTwist System – 10-Second Replacement

Worried about service? No need. Miraqua engineers designed the filter system so anyone can replace it without the need for tools or a technician.
How does it work?
1. Open the cover.
2. Twist the used filter ("Twist" system).
3. Pull it out and insert a new one.
4. Turn it back. Done! The device will reset the consumption counter automatically (or you can do it with one button).

Types of Filters – What's Inside?

The complete filtration cycle in Miraqua typically relies on three powerful cartridges:

  • PAC/CF (Pre-Carbonated) Filter: "The Bodyguard." Removes large contaminants: rust, sand, chlorine, and suspended solids. Replaced most frequently (every 6-9 months) to protect the more expensive membrane.
  • RO (Reverse Osmosis) Membrane: "The Heart." It removes viruses, bacteria, limescale, antibiotics, and microplastics with an accuracy of 0.0001 microns. Replace every 12-24 months.
  • C2 / CB Filter (Carbon + Mineralization): "The Cut." Improves the taste of water, gives it crystal freshness, and enriches it with minerals.
Replacing the filter in the Miraqua system Twist dispenser
Simple Twist system – replacing the filter is easier than changing a light bulb.

Why only originals?

Miraqua devices operate at high pressure and offer unique features (such as hydrogen water). Using cheap substitutes can damage the device's pump, leak the system, or—worse still—not ensure proper microbiological purity of the water.

QuickTwist System – 10-Second Replacement

Worried about service? No need. Miraqua engineers designed the filter system so anyone can replace it without the need for tools or a technician.
How does it work?
1. Open the cover.
2. Twist the used filter ("Twist" system).
3. Pull it out and insert a new one.
4. Turn it back. Done! The device will reset the consumption counter automatically (or you can do it with one button).

Types of Filters – What's Inside?

The complete filtration cycle in Miraqua typically relies on three powerful cartridges:

  • PAC/CF (Pre-Carbonated) Filter: "The Bodyguard." Removes large contaminants: rust, sand, chlorine, and suspended solids. Replaced most frequently (every 6-9 months) to protect the more expensive membrane.
  • RO (Reverse Osmosis) Membrane: "The Heart." It removes viruses, bacteria, limescale, antibiotics, and microplastics with an accuracy of 0.0001 microns. Replace every 12-24 months.
  • C2 / CB Filter (Carbon + Mineralization): "The Cut." Improves the taste of water, gives it crystal freshness, and enriches it with minerals.
Replacing the filter in the Miraqua system Twist dispenser
Simple Twist system – replacing the filter is easier than changing a light bulb.

Why only originals?

Miraqua devices operate at high pressure and offer unique features (such as hydrogen water). Using cheap substitutes can damage the device's pump, leak the system, or—worse still—not ensure proper microbiological purity of the water.

QuickTwist System – 10-Second Replacement

Worried about service? No need. Miraqua engineers designed the filter system so anyone can replace it without the need for tools or a technician.
How does it work?
1. Open the cover.
2. Twist the used filter ("Twist" system).
3. Pull it out and insert a new one.
4. Turn it back. Done! The device will reset the consumption counter automatically (or you can do it with one button).

Types of Filters – What's Inside?

The complete filtration cycle in Miraqua typically relies on three powerful cartridges:

  • PAC/CF (Pre-Carbonated) Filter: "The Bodyguard." Removes large contaminants: rust, sand, chlorine, and suspended solids. Replaced most frequently (every 6-9 months) to protect the more expensive membrane.
  • RO (Reverse Osmosis) Membrane: "The Heart." It removes viruses, bacteria, limescale, antibiotics, and microplastics with an accuracy of 0.0001 microns. Replace every 12-24 months.
  • C2 / CB Filter (Carbon + Mineralization): "The Cut." Improves the taste of water, gives it crystal freshness, and enriches it with minerals.
Replacing the filter in the Miraqua system Twist dispenser
Simple Twist system – replacing the filter is easier than changing a light bulb.

Why only originals?

Miraqua devices operate at high pressure and offer unique features (such as hydrogen water). Using cheap substitutes can damage the device's pump, leak the system, or—worse still—not ensure proper microbiological purity of the water.

Frequently asked questions


  • Your distributor will tell you this. Every Miraqua device (Delta, Omega, Alfa) is equipped withintelligent monitoring systemThe display screen shows the usage indicator for each filter individually. When a filter is running low, the icon will change color or flash.

  • It depends on your water quality and usage, but a standard schedule looks like this:

    • Pre- and post-filters (PAC/CF/CB):Every 6 to 9 months.
    • RO membrane:Every 12 to 24 months.
      The most economical option is to buyAnnual Set, which includes a complete set of filters at a lower price.


  • No. Although they look similar, Miraqua Delta, Omega, and Yota models may have different mounts or cartridge sizes. Always check the product description ("Compatibility") or the name of your device before purchasing.

  • Dragging the exchange is a risk.

    • Clogged pre-filterwill lower the water pressure and force the pump to work harder (risk of failure).
    • Worn RO membranewill start to let in stone and bacteria.
    • The water will lose its delicious taste and bacterial biofilm may begin to grow inside the device.


  • Yes. After inserting the new cartridge, you mustreset filter counterin the device menu (the instructions can be found in the filter box). Additionally, it is recommended to pour (drain) about 2-3 liters of water to rinse the new cartridge from carbon dust and activate the bed.

Guide / Filtration technologies

1 4

Product reviews

5.00 ★ (15)
Verified